Multiscale Finite Element Analysis of Unbonded Flexible Risers

Unbonded flexible risers are a key technology in existing and proposed offshore developments. With increasing water depth, the demands on risers increase and the design against hydrostatic and tension loads becomes more of a challenge. In addition, many existing subsea production systems are approaching the end of their design life and operators need to know if they can remain in-service.To enable the benefits from deepwater production and life extension projects to be realized while minimizing risks to life, property and the environment, accurate modelling and analysis tools are required to improve the prediction of failure modes and to develop a better understanding of the conditions leading to progressive failure. In this work, a multi-scale approach is adopted whereby a global dynamic analysis model is employed to determine the overall displacements of the riser and this is linked with a local model that can provide accurate forces and stresses for the prediction of collapse, fatigue damage and buckling of tensile armour wires.Firstly, we describe a nonlinear constitutive model for use in large-scale dynamic analysis of flexible risers based on an analytical homogenization of composite cylinders using the analogy between slip between pipe layers and plastic flow in continua. The model is able to reproduce the bending hysteresis behaviour observed in flexible pipes and its dependence on internal and external pressure. Secondly, we show a procedure for obtaining equivalent material parameters for this model from finite element local analyses of a flexible pipe. Finally, we show the implementation of this constitutive model in a riser system using two-dimensional co-rotational hybrid beam finite elements.Copyright © 2014 by ASME