Neutron-induced fission cross section of Pu-240 from 0.5 MeV to 3 MeV
2015
Pu-240 has recently been pointed out by a sensitivity study of the Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) to be one of the isotopes whose fission cross section lacks accuracy to meet the upcoming needs for the future generation of nuclear power plants (GEN-IV). In the High Priority Request List (HPRL) of the OECD, it is suggested that the knowledge of the Pu-240(n, f) cross section should be improved to an accuracy within 1-3 %, compared to the present 5%. A measurement of the Pu-240 cross section has been performed at the Van de Graaff accelerator of the Joint Research Center (JRC) Institute for Reference Materials and Measurements (IRMM) using quasi-monoenergetic neutrons in the energy range from 0.5 MeV to 3 MeV. A twin Frisch-grid ionization chamber (TFGIC) has been used in a back-to-back configuration as fission fragment detector. The Pu-240(n, f) cross section has been normalized to three different isotopes: Np-237(n, f), U-235(n, f), and U-238(n, f). Additionally, the secondary standard reactions were benchmarked through measurements against the primary standard reaction U-235(n, f) in the same geometry. A comprehensive study of the corrections applied to the data and the associated uncertainties is given. The results obtained are in agreement with previous experimental data at the threshold region. For neutron energies higher than 1 MeV, the results of this experiment are slightly lower than the ENDF/B-VII.1 evaluation, but in agreement with the experiments of Laptev et al. (2004) as well as Staples and Morley (1998).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
19
References
16
Citations
NaN
KQI