ECN n-type silicon solar cell technology: An industrial process that yields 18.5%
2009
There is currently much interest in n-type solar cells because of the advantages of this material. N-type material is expected to be more favourable for obtaining high efficiencies than p-type doped substrates. We have developed a process for n-type solar cells for large area multicrystalline and monocrystalline silicon wafers. The production process is based on industrial processing steps such as screen-printed metallization and firing through. The surfaces of these cells are passivated with a layer stack consisting of SiO 2 and SiN x where the former is created by a wet chemical process and the latter by inline PECVD. We demonstrate that the surface passivation can be improved with an alternative wet chemical process for creating the SiO 2 layer. This new process results in an enhancement of the implied V oc of unmetallized cells as measured by quasi-steady-state photoconductance (QSSPC) and the V oc of completed cells. The process Improvements have yielded a new record efficiency of 18.5 % (for a particular rear reflection surface) that was independently confirmed by Fraunhofer ISE CalLab.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
3
References
5
Citations
NaN
KQI