Tribological Characteristics of Sustainable Fiber-Reinforced Thermoplastic Composites under Wet Adhesive Wear

The friction and specific wear rate of sustainable kenaf fiber–reinforced polyurethane composites were investigated against stainless steel counterface and under wet contact conditions. The new composites were evaluated at different applied loads (50–80 N), sliding distances (up to 2.7 km), and fiber mat orientations. Scanning electron microscopy (SEM) was used to observe the damage features on the worn surfaces. The results revealed that sustainable kenaf fibers assisted in enhancing the wear and frictional performance of the polyurethane thermoplastic composite by about 59 and 90%, respectively. Operating parameters and mat orientation controlled the wear and the frictional behavior of the composite. Better wear performance was exhibited at high loads and when the fiber mats were oriented perpendicularly to the sliding direction. Observations of the worn surfaces revealed different features of damage such as microcracks, fiber tearing, fiber detachment, and delamination. However, there was no trace of f...