CONCEPTUAL DESIGN OF THE ESS DTL FARADAY CUP
2014
The DTL section of the ESS linac will accelerate the beam form 3.6 MeV to 90 MeV at a peak current of 62.5 mA. It is foreseen to install after each DTL tank a Faraday cup for beam current and the beam transmission measurements during retuning phase. An energy degrader will be positioned in front of the in order to perform a low resolution phase scan of the DTL tank before injecting the beam in the downstream structure. This paper describes the preliminary studies of the Faraday cup, mainly focus on the energy degrader.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
5
References
0
Citations
NaN
KQI