Pressure assisted flash sintering of Mn-Co based spinel coatings for solid oxide electrolysis cells (SOECs)

Abstract Pressure assisted flash sintering was used to process Mn-Co-Cu based spinel coatings, electrophoretically deposited on a Crofer22APU interconnect. This method resulted in highly dense coatings, heat-treated for only a short duration ( 200 oC/min). The high heating rate promoted Cu modified Mn-Co spinel and limited the formation of a Cr-oxide scale on the Crofer22APU substrate. Flash sintering was found to be a promising and time efficient sintering technique to overcome some of the issues related to low coating density and oxide scale formation in solid oxide electrolysis cell conditions.