Heating rate effects on the TL characteristics of hot filament CVD diamond film
2010
The thermoluminescence (TL) glow curve of polycrystalline chemically vapor deposited (CVD) diamond is strongly dependent on the heating rate used. In the present work, we report results about the heating rate effects on a 500 μm hot filament (HF) CVD diamond film grown on silicon substrate using a precursor gas mixture composition of CH 4 (5 sccm)― CO( 10 sccm)―H 2 (400 sccm). The irradiations were performed with 60 Co source. The TL measurements were carried out at different heating rates in the 2―30 K/s range. As the heating rate increases, the maximum TL peak intensity decreases and shifts to higher temperature. The shift was from 578 to 669 K for heating rates of 2 and 30 K/s, respectively. The kinetics parameter and its dependence on the heating rate were evaluated using the Chen's peak shape method and a computerized glow curve deconvolution (CGCD) method.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
35
References
1
Citations
NaN
KQI