[Analysis on the removal efficiency and mechanisms of phosphorus by modified zeolites substrates coated with LDHs reacted by different metal compounds in laboratory-scale vertical-flow constructed wetlands].

: Six kinds of metal compounds which were CaCl2 , ZnCl2, MgCl2, FeCl3, AlCl3, and CoCl3 were formed nine kinds of different combinations in the alkaline conditions to synthesized LDHs (Layered Double Hydroxides), which were in-situ coated on the surface of zeolites. With the filling of the original and nine kinds of modified zeolites in the columns to simulate a laboratory-scale vertical-flow constructed wetland system, the experiments of purified phosphorus were conducted. Combined removal efficiency with adsorption isotherm data of the ten kinds of zeolites, mechanism for strengthening the removal rates of the phosphorus by the modified zeolites was studied. The results showed that compared with the original zeolites, the removal rates of the phosphorus by nine kinds of modified zeolites were enhanced with various degrees. In the cases of Zn involved in the modified zeolites, the removal efficiencies of phosphorus reached a high quality. Especially, the ZnFe-LDHs had the average removal rates of the total phosphorus, the dissolved phosphorus and the phosphate were over 90%, and its maximum adsorption capacity of the phosphorus was three times higher than that of the original zeolites. Therefore, by means of increasing the adsorption capacity and improving the chemical adsorption ability of phosphorus, the modification to coated LDHs on the zeolites reached the aim of strengthening the purification of the phosphorus.