Comparison of artificial tooth position in dentures fabricated by heat-curing and additive manufacturing.

BACKGROUND The purpose of this study was to compare the displacement of tooth arrangement in dentures fabricated by additive manufacturing (AM) and heat curing. METHODS Three-dimensional (3D) scanning was performed for edentulous jaw models. After the teeth were arranged, 3D scanning for the wax denture was performed. Heat-cured dentures were fabricated with heat-cure polymer resin. Based on data obtained by subtracting the model data from wax denture data, AM dentures were fabricated from ultraviolet-cured acrylic resin. Accuracy was verified by superimposing heat-cured and AM dentures on the tooth region data from the wax dentures and measuring displacement of the tooth arrangement. RESULTS In the maxillary dentures, the amount of tooth displacement for the heat-cured dentures and for the AM dentures ranged from -0.08 to +0.06 mm and from -0.25 to +0.06 mm respectively. A significant difference was observed between two dentures. In the mandibular dentures, the amount of tooth displacement for the heat-cured dentures and for the AM dentures ranged from -0.09 to +0.07 mm and from -0.03 to +0.07 mm respectively. No significant difference was observed between two dentures. CONCLUSIONS The artificial teeth of the maxillary dentures fabricated by AM showed a greater displacement compared to those by heat curing.