Chemical modification combined with corona treatment of UHMWPE fibers and their adhesion to vinylester resin

The influence of corona treatment on the near-surface structures of treated ultra-high-molecular-weight polyethylene (UHMWPE) fibers was studied first by atomic force microscopy (AFM). AFM pictures showed that the pits on the corona-treated PE fiber surfaces had different change characteristics in depth compared with in length and breadth with variations of corona power. Then the UHMWPE fibers were subjected to chemical modification following the corona treatment, named the two-stage treatment. Surface morphologies and chemical properties of the treated fibers were analyzed by scanning electron microscopy (SEM), FT-IR–ATR spectroscopy and Raman spectroscopy. The results obtained suggested that some carbon–carbon double bonds had been introduced on the surfaces of the PE fibers after the two-stage treatment. These unsaturated groups could participate in free-radical curing of vinylester resin (VER), and this resulted in improvement of interfacial adhesion strength in the PE fiber/VER composites. In additio...