Low jitter FBAR based chip scale precision oscillator

We present a FBAR oscillator that operates at 628MHz, achieves low jitter 3 . The chip-scale oscillator employs a feedback circuitry in the encapsulating lid of a FBAR resonator and makes use of a differential Colpitts oscillator design fabricated in 0.6µm CMOS technology. To achieve the frequency precision required for a reference oscillator, we demonstrate the ability to tune the oscillator over 700ppm using a switched capacitor scheme to compensate for manufacturing tolerances. For achieving frequency stability over temperature and packaging stress, the FBAR resonators used in these oscillators employ silicon dioxide layer temperature compensation and a stress relieved structure respectively. The measured integrated jitter (12kHz to 20MHz) for the oscillators with a supply voltage of 3.3V across a wafer is 33fs with a far from carrier phase noise of −170dBc/Hz .The median current draw from the supply is 16.5mA and the output power measured at a 50ohm load using a balun is 0dBm.These oscillators are suitable for co-integration as reference clocks in high speed communication ICs where size and performance are paramount.