Using Glass Defect Engineering to Obtain Order-disorder Transformation in Cathode for High Specific Capacity Lithium ion Battery

Abstract Vanadium-based glass shows high electronic conductivity without grain boundaries. It easily undergoes structural microcrack defects during fabrication using the melt-quenching method resulting in voids that affect its properties. This paper demonstrates that the cathode material obtained by nanocrystals precipitated by long-cycle electric fields are identical with those obtained by the heat treatment method. V2O5-Li3PO4 (VP) glass precipitates nanocrystals of Li3P and Li0.3V2O5 under heat treatment at 340°C. It showed a prominent specific capacity of 269.4 mAh.g-1 in the first cycle at a current density of 50 mA.g-1, and 227.4 mAh.g-1 after 50 cycles with a retention rate of 86.3 %, as the cathode of a lithium ion battery. Thermal field-controlled VP glass allows selective crystallization of nanocrystal of Li3P and Li0.3V2O5, which promote conductivity and charge transfer and significantly enhance the electrode reaction kinetics. Through ex-situ TEM, DSC, XRD and XPS, it was observed that discharge/charge caused disordered transitions in the amorphous VP, leading to the formation of nanocrystals of Li3P and Li0.3V2O5 after 100 cycles. Amorphous glass electrode material as a high-energy unstable state, has same tendency of precipitation of crystals to become stable under different treatment methods with long electric field cycles and thermal field induction.