Heat sink effect of underwater polypectomy in a porcine colon model.

Background Underwater polypectomy without the need for submucosal injection has been reported. A heat-sink effect by immersing the polyp in water was proposed but no such experiment has been performed to support the claim. We compared the temperature rise on the serosal side during polypectomy between air- and water-filled colon. Method Freshly harvested porcine colons were placed in a metal tray with cautery electrode pad attached to its bottom. An upper endoscope was used with a cap and a rubber band mounted to the distal end. A mucosal site was randomly selected and identified on its serosal surface with a marker while suction was applied. Suction was applied again and a ligation band was applied to create a polyp. A cautery snare grasped the artificial polyp just below the band. An assistant placed the tip of a thermometer at the marked site on the serosal surface to record the baseline temperature before cautery and the highest temperature during polypectomy. Seven polypectomies in air and underwater were performed. Results Mean (standard deviation) baseline temperature were 23.3 (0.6) °C and 23.4 (0.6) °C in the air and water groups, respectively. The maximum rise in temperature during polypectomy was 6.1 (4.5) °C and 1.4 (1.0) °C in the air and water groups, respectively (P = 0.004). Conclusions The maximum temperature rise during polypectomy was significantly less when polypectomy was performed underwater, supporting the hypothesis that a heat-sink effect does exist during underwater polypectomy.