International comparison CCQM-K54: Primary standard gas mixtures of hexane in methane
2010
The aim of this comparison is to evaluate the gravimetry and purity verification of gas mixtures prepared by introducing a liquid into a gas cylinder. This type of preparation is well known from, e.g., ethanol in nitrogen/air (CCQM-K4), and n-hexane in synthetic natural gas (CCQM-K16). The choice for n-hexane in methane is based on the relevance of natural gas primary standard mixtures and higher hydrocarbons in synthetic natural gas (for, e.g., dew point calibrations). Furthermore, n-hexane is relatively straightforward to analyse using a GC/FID (gas chromatograph equipped with a flame ionisation detector) with good repeatability. Eight laboratories participated. After the data evaluation, the result of one laboratory was eliminated to arrive at a consistent subset. The quality of the fitted line was not overly good, leading to small discrepancies in the degrees-of-equivalence calculated for three other laboratories. Only four laboratories are consistent with the KCRV. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
5
Citations
NaN
KQI