The Study on the Method of Measurement for Cycle Time of Bus System

The measurement method is proposed for performance-evaluation of bus system in this paper. The cycle tin in manufacturing system that sensor and actuator play on the role is important factor for performance-evaluation. In order to measure cycle time, proposed method is based on simple algorithm. But it must consider delay elements in PLC and it`s peripheral. The test of the cycle time is divided into the best case and the worst case and parameters are set corresponding to two cases for the improvement of measurement result It is shown that the proposed method is efficient by measuring the cycle time of the fieldbus basing on the mathematics model. As a result, due to simplicity and convenience of proposed method, the engineering cost and time demanding for test of cycling time can much reduce.