Compound materials by PM-HIP

There are many applications where compound materials can be of interest, for example when different properties are needed in different parts of a component. Compound materials can be produced by hot isostatic pressing (HIP) of powder metallurgical materials. One aspect that should be considered in the design is the quality of the interface between the two different material compositions. Diffusion during HIP can cause formation of brittle phases in the interface or deteriorate properties by diffusion of alloying elements. The present work shows results from a study where different steel types were joined (quench and temper steel/air hardening steel/bearing steel with a tool steel/corrosion resistant martensitic steel). The evaluation was performed by computational predictions and by small scale HIP experiments that were evaluated by microstructure analysis and chemical analysis.