The ageing response of direct laser deposited metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr
2021
Abstract The formation of solely β-phase titanium after direct laser deposition (DLD) of metastable β-Ti alloy does not provide the desired properties. Hence, we present a study into the ageing response of DLD built Ti-5553 β-Ti alloy to obtain the bimodal (β+α) microstructure providing improved properties. The results obtained from the heat treatments showed that a unique microstructure with refined intragranular and discontinuous grain boundary α-phase can be obtained by directly ageing (using fast heating rate) the as-built samples at the ageing condition (600 °C + 0.5 h). This microstructure produced a good balance in mechanical properties (UTS = 1345 ± 5 MPa and δ = 11.6 ± 0.5 %). The interparticle spacing between the α-phase ( d ) showed a correlation with microhardness ( H v = 340 + 158 / √ d ) and yield stress ( σ 0.2 = 870 + 15086 / √ d ) values for all the aged samples.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
30
References
1
Citations
NaN
KQI