Simultaneous determination of Si, Al and Na concentrations by particle induced gamma-ray emission and applications to reference materials and ceramic archaeological artifacts

Abstract A particle induced gamma ray emission (PIGE) method using 4 MeV proton beam was standardized for simultaneous determination of Si, Al and Na concentrations and has been applied for non-destructive analysis of several reference materials and archaeological clay pottery samples. Current normalized count rates of gamma-rays for the three elements listed above were obtained by an in situ method using Li as internal standard. The paper presents application of the in situ current normalized PIGE method for grouping study of 39 clay potteries, obtained from Rajasthan and Andhra Pradesh states of India. Grouping of artifacts was carried out using the ratios of SiO 2 to Al 2 O 3 concentrations, due to their non volatile nature. Powder samples and elemental standards in pellet forms (cellulose matrix) were irradiated using the 4 MeV proton beam (∼10 nA) from the 3 MV tandem accelerator at IOP Bhubaneswar, and assay of prompt gamma rays was carried out using a 60% relative efficiency HPGe detector coupled to MCA. The concentration ratio values of SiO 2 /Al 2 O 3 indicated that pottery samples fell into two major groups, which are in good agreement with their collection areas. Reference materials from IAEA and NIST were analyzed for quantification of Si, Al and Na concentrations as a part of validation as well as application of PIGE method.