TESTING THE TOUGHNESS OF POLYPROPYLENE FILLED WITH GLASS POWDER
2012
The purpose of this paper is to show polymer waste as a raw material or otherwise usable material derived from a partial separation of communal waste. This paper describes the possibilities of polypropylene re-use through recycling with addition of glass powder, from the point of view of toughness caused by impact load. Standard test specimens, made of basic material – polypropylene, with addition of 0%, 5%, 10%, 15%, 20%, 25% and 30% of glass powder with granulation less than 0,5 mm, have been tested through six processing cycles. The measured values gave a possibility of forming patterns for changes of the observed material with different content of additives, through processing cycles, which can be helpful in further research and analysis.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
5
References
0
Citations
NaN
KQI