Biomechanical and adhesion comparison of linea alba prophylactic reinforcement with coated and uncoated three-dimensional T-shaped mesh in rabbits.

PURPOSE Incisional hernia (IH) is a frequent complication of median laparotomy. The use of prophylactic mesh to reduce IH incidence has gained increasing attention. We hypothesized that in an animal model, linea alba prophylactic reinforcement with a three-dimensional T-shaped polypropylene mesh results in greater abdominal wall resistance. METHODS Study was performed in 27 rabbits. After abdominal midline incision, animals were divided into three groups according to the laparotomy closure method used: (1)3D T-shaped coated mesh; (2)3D T-shaped uncoated mesh; and (3) closure without mesh. After 4 months, each animal's abdominal wall was resected and tensiometric tests were applied. Results included IH occurrence, adhesions to the mesh, and wound complications. RESULTS There was no significant difference between the groups in maximum tensile strength (p=0.250) or abdominal wall elongation under maximum stress (p=0.839). One rabbit from the control group developed IH (p=1.00). Small intestine and colon adhesions occurred only in the uncoated mesh group (p<0.001) and the degree of adhesions was higher in this group compared to the coated mesh group (p<0.05). CONCLUSION Use of the current 3D T-shaped prophylactic mesh model did not result in a significant difference in tensiometric measurements when compared with simple abdominal wall closure in rabbits.