Realization of an advanced nozzle concept for compact chemical oxygen iodine laser

Abstract Conventional supersonic chemical oxygen–iodine lasers (SCOIL) are not only low-pressure systems, with cavity pressure of 2–3 Torr and Mach number of approximately 1.5, but also are high-throughput systems with a typical laser power per unit evacuation capacity of nearly 1 J/l, thus demanding high capacity vacuum systems which mainly determine the compactness of the system. These conventional nozzle-based systems usually require a minimum of a two-stage ejector system for realization of atmospheric pressure recovery in a SCOIL. Typically for a 500 W class SCOIL, a first stage requires a motive gas flow (air) of 120 gm/s to entrain a laser gas flow of 3 g/s and is capable of achieving the pressure recovery in the range of 60–80 Torr. On the other hand, the second stage ejector requires 4.5 kg/s of motive gas (air) to achieve atmospheric pressure recovery. An advanced nozzle, also known as ejector nozzle, suitable for a 500 W-class SCOIL employing an active medium flow of nearly 12 g/s, has been developed and used instead of a conventional slit nozzle. The nozzle has been tested in both cold as well as hot run conditions of SCOIL, achieving a typical cavity pressure of nearly 10 Torr, stagnation pressure of approximately 85 Torr and a cavity Mach number of 2.5. The present study details the gas dynamic aspects of this ejector nozzle and highlights its potential as a SCOIL pressure recovery device. This nozzle in conjunction with a diffuser is capable of achieving pressure recovery equivalent to a more cumbersome first stage of the pressure recovery system used in the case of a conventional slit nozzle-based system. Thus, use of this nozzle in place of a conventional slit nozzle can achieve atmospheric discharge using a single stage ejector system, thereby making the pressure recovery system quite compact.