Friction velocity and power law velocity profile in smooth and rough shallow open channel flows

This paper examines the mean velocity profiles in shallow, turbulent open channel flows. Velocity measurements were carried out in flows over smooth and rough beds using a laser-Doppler anemometer. One set of profiles, composed of 29 velocity distributions, was obtained in flows over a polished smooth aluminum plate. Three sets of profiles were obtained in flows over rough surfaces. The rough surfaces were formed by two sizes of sand grains and a wire mesh. The flow conditions over the rough surface are in the transitional roughness state. The measurements were obtained along the centerline of the flume at three different Froude numbers (Fr ~ 0.3, 0.8, 1.0). The lowest Froude number was selected to obtain data in the range of most other open channel testing programs and to represent a low subcritical Froude number. For each surface, the Reynolds number based on the boundary layer momentum thickness was varied from about 600 to 3000. In view of the recent questions concerning the applicability of the log-l...