Structural characterization and catalytic evaluation of transition and rare earth metal doped ceria-based solid solutions for elemental mercury oxidation

The catalytic behavior of various CeO2-based solid solutions, namely, Ce1−xTMxO2−δ (TM = Mn, Fe, or Zr) and Ce1−xRExO2−δ (RE = Pr, La, or Sm) was studied for the removal of elemental mercury (Hg0) from coal-derived flue gas by catalytic oxidation (Hg0 → Hg2+). The investigated catalysts were synthesized by a coprecipitation method and characterized by various techniques, namely, X-ray diffraction (XRD), Raman spectroscopy (RS), high-resolution electron microscopy (HREM), Brunauer–Emmett–Teller (BET) surface area, X-ray photoelectron spectroscopy (XPS), temperature programmed reduction (TPR), and diffuse reflectance spectroscopy (UV-DRS). The XRD results confirmed the incorporation of Mn, Fe, Zr, La, Pr, and Sm cations into the CeO2 lattice and the formation of nanocrystalline solid solutions. The TEM measurements established the nanocrystalline nature of the solid solutions. The RS measurements suggested that the substitution process promotes the formation of oxygen vacancies, which hastens the diffusion rate of oxygen and improves the Hg oxidation. UV-vis DRS studies demonstrated the presence of the charge transfer transitions O2− → Ce3+ and O2− → Ce4+. The XPS and H2-TPR results suggested that the reduction of Ce4+ → Ce3+ is the foremost reason for the increase in oxygen vacancies, which are beneficial for Hg0 removal. The order of mercury oxidation activity over various doped catalysts is as follows: CM > CL > CZ > CF > CS > C > CP.