Effect on Vibroengineering of Material Deterioration in a Scale-Down Reinforced Concrete Containment Vessel Specimen

This study is aim to evaluate the natural frequency variation of the scale-down reinforced concrete containment vessel specimen under accelerated corrosion conditions. A plastic ring was sealed around the perimeter of the cylindrical vessel bottom with the 3.5 % NaCl solution to achieve the accelerated corrosion test. Concrete resistivity, open circuit potential, corrosion rate and natural frequencies were tested and discussed in this study. Test results presented that the accelerated corrosion method with a direct 60 voltage applied was a suitable method for estimating and accelerating the concrete vessel specimen. Therefore, the changes in natural frequencies were consistent with the material degradation of the concrete vessel specimen. The natural frequencies decreased with the increasing corrosion rate or decreasing resistivities for the specimen at higher mode, but would be no change for the specimen at the natural frequency of 1st mode.