Cathodic electrosynthesis of ZnMn2O4/Mn3O4 composite nanostructures for high performance supercapacitor applications

Abstract ZnMn 2 O 4 /Mn 3 O 4 composite nanostructures were prepared by cathodic electrodeposition followed by heat treatment. A mixed hydroxide precursor was galvanostatically electrodeposited from aqueous solution containing Mn and Zn (as nitrates) and the obtained precursor was annealed to prepare the composite. This composite exhibited much better electrochemical behaviors than bare Mn 3 O 4 . Rietveld analysis of the X-ray diffraction (XRD) data showed that the product was composed of Mn 3 O 4 , ZnMn 2 O 4 and minor amounts of λ-MnO 2 . Furthermore, the obtained composite was characterized by Fourier transform infrared spectrometry (FT-IR) and energy dispersive spectrometry (EDS). Field emission scanning electron micrographs (FE-SEM) and transmission electron micrographs (TEM) revealed co-existence of nanoparticles and high aspect ratio nanorods. Electrochemical performance and ion transport of ZnMn 2 O 4 /Mn 3 O 4 composite were studied via galvanostatic charge-discharge (GCD) cycling and electrochemical impedance spectroscopy (EIS). Cyclic voltammetric (CV) measurements showed a maximum specific capacitance of 321.34 F/g at the scan rate of 1 mV/s. 93% of this specific capacitance was retained after 2000 cycles.