Using Infrared Laser Absorption to Measure Hydrocarbon Concentration in a Lean-Burn, Stratified-Charge, Spark-Ignition Engine

The operating range of lean-burn spark-ignition (SI) engines is limited by the cycle-to-cycle variability of the fuel concentration at or near the spark plug at ignition timing. An experimental investigation was undertaken to measure the temporal and spatial distribution of hydrocarbon (HC) concentration in a spark-ignition engine, using the infrared (IR) laser absorption at 3392 nm. The purposes were to establish whether there is a correlation between time-resolved HC measurements for a range of global air-to-fuel (A/F) ratios (A/F = 15.5–23) with the strength of the firing stroke and to establish how this varies with fuel port-injection strategies against either open (injection timing 30° crank angle (CA) after intake top dead center) or closed-valves (injection timing 180°CA after intake top dead center), respectively resulting in stratified and near-homogeneous charge distributions. The results showed that IR line-of-sight (LOS) averaged A/F ratio measurements yielded a good agreement with the global ...