Microstructure development of ultra fine grained Mg-22 wt%Gd alloy prepared by high pressure torsion

Abstract A hardenable lightweight Mg-22 wt%Gd alloy with ultra fine grained (UFG) structure was prepared by high pressure torsion (HPT) at ambient temperature. The development of microstructure during HPT processing was investigated. A homogeneous UFG structure with grain size of 300 nm was achieved after 15 HPT revolutions. The UFG alloy exhibits enhanced strength due to work strengthening by tangled dislocations forming a dense forest throughout grains. Dislocation density in the sample was determined by positron annihilation spectroscopy (PAS) and X-ray line profile analysis (XLPA). It was found that there is an additional source of X-ray profile broadening in addition to small crystallites and micro-strains caused by dislocations. The additional micro-strain component was attributed to lattice modulation by Gd-rich nano-wires formed by agglomeration of Gd solutes and to strains arising from boundaries of crystallite domains and inter-domain interactions. Analysis of the influence of the crystallite size on the strength of UFG Mg-22 wt%Gd alloy revealed a breakdown in the Hall-Petch relationship when the crystallite size decreased below a critical value of ≈30 nm.