Artificial neural network–based internal leakage fault detection for hydraulic actuators: An experimental investigation:

2018 
Internal leakage is a typical fault in the hydraulic systems, which may be caused by seal damage, and result in deteriorated performance of the system. To study this issue, this article carries out an experimental investigation of artificial neural network–based detection method for internal leakage fault. A period of pressure signal at one chamber of the actuator was taken in response to sinusoidal-like inputs for the closed-loop controlled system as a basic signal unit, and totally, 1000 periodic signal units are obtained from the experiments. The above experimental measurements are repetitively implemented with 11 different active exerted internal leakage levels, that is, totally 11,000 basic signal units are obtained. For signal processing, the pressure signal in the operation condition without active exerted leakage is chosen to generate a baseline with suitable pre-proceed, and the relative values of the other basic signal units (D-value between the baseline and other original signals) act as the gl...
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    28
    References
    15
    Citations
    NaN
    KQI
    []