A Computational Analysis of Interfacing Converters with Advanced Control Methodologies for Microgrid Application

Power electronics converter and inverter systems for microgrid operations are always stochastic. When the system is operating in grid-tied mode, the attached load is not constant, so the current which drawn from the DC grid also varies leads to a voltage drop and that causes steady-state error in between the actual and desired output voltage in microgrid. DC-DC bidirectional converters are widely used in microgrid application that facilitates bidirectional energy convertion which having boost mode operation in one direction and bucking mode in other operation. The Interfacing converter is controlled by using the Maximum Power Point Tracking (MPPT) control technique for obtaining maximum power during different atmospheric conditions. In this work, a Model Predictive Control (MPC) strategy is proposed which having an improved cost function, single prediction horizon, and an observer to keep tracking the output voltage. Here, MPC is proposed for cumulative control in between the DC grid side converters and AC grid side inverter, and for improving the power quality and reliability of the utility grid. Both continuous time and discrete time domain models are formed for the whole system for applying different control strategies. Along with MPC, the system has been controlled by using other controllers like as PI controller, Sliding Mode Controller (SMC). Luenberger observer is used to check the DC grid voltage when disturbances are implemented. Here, all the computational results are compared for justifying and validate a better controlling method for microgrid application. These kind of work is first time reported in this manuscript.