On the limits of low-numerical-aperture imaging scatterometry
2020
Although imaging scatterometry has been demonstrated to be a powerful technique for characterization of nano-gratings when high lateral resolution is required, some limits of this novel technique are still undisclosed yet, such as the constraint for the imaging numerical aperture (NA), the number of unit cells for accurate grating reconstruction, and the analyzability of image pixels associated with the grating region. To this end, we establish a vectorial image formation (VIF) model for imaging scatterometry based on the finite-difference time-domain (FDTD) method and vectorial diffraction theory. According to the established VIF model and the simulation results of a Si grating sample with finite numbers of unit cells, we find that accurate grating reconstruction by routine RCWA (rigorous coupled-wave analysis) -based data analysis requires an upper limit for the NA of the employed objective. And enough numbers of unit cells are also required to be covered in the illumination spot. Only in these conditions, the zeroth-order diffraction information of the grating under test can be exclusively and completely collected by the imaging system. Moreover, only the image pixels off the edge of the grating region are analyzable by routine RCWA-based data analysis due to the effect of edge scattering. The required number of grating unit cells and the size of the analyzable region are closely related with the imaging NA and the ratio between the illumination spot size and the size of the grating region D/L. Higher imaging NA or smaller D/L typically requires fewer grating unit cells and meanwhile allows a larger analyzable region. The investigation in this paper promises to provide valuable insights into the application of imaging scatterometry.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
23
References
2
Citations
NaN
KQI