Strength properties of glued laminated timber made from edge-glued laminae I: strength properties of edge-glued karamatsu (Larix kaempferi) laminae

The object of this study was to investigate the strength properties of edge-glued laminae and to propose a suitable grading method based on the lamina modulus of elasticity (MOE). Edge-glued laminae composed of lumber with similar MOEs (uniform laminae) and edge-glued laminae produced by randomly gluing lumber independent of MOE (random laminae) were made from karamatsu (Larix kaempferi) lumber having the same thickness and length, but various widths. For both the uniform and random laminae, there was a strong correlation between MOE values measured using the longitudinal vibration technique, the static bending test, and a grading machine. The average values of bending, tensile, and compressive strengths of the uniform laminae were similar to those of the random laminae. On the other hand, the average strength of laminae without end joints was significantly higher than that of finger-jointed laminae for both uniform and random laminae. Finger-joints and knots played a significant role in the failure of specimens, but the edge-gluing and the difference in MOE within an edge-glued lamina did not appear to affect the strength properties. The bending, tensile, and compressive strengths of edge-glued laminae were strongly correlated to the lamina MOE.