Characterisation of Air-Water Two-Phase Flow Using a Wire-Mesh Sensor

2011 
Two phase flow occurs in many industrial applications, mainly in the transport of mixtures. Many patterns can be produced according to the liquid and gas flow rates. The identification of these patterns is very important in the design of piping systems and equipments. This work proposes an experimental study to identify multiphase flow patterns of water and air in horizontal pipes. The study was developed using an experimental circuit of 26 mm diameter and 9.2 m length pipe, at Thermal Sciences Lab (LACIT) at the Federal University of Technology - Parana. To characterize the flow patterns, an intrusive mesh electrodes sensor was used, which allows the detailed visualization of the phases distribution. Tests were made using several experimental settings of water and gas flow rates. Measurements were compared to images obtained by high speed camera and the temporal void fraction series which were analyzed with the use of PDF and PSD functions, showing the singularities for each two-phase flow pattern.Copyright © 2011 by ASME
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    1
    Citations
    NaN
    KQI
    []