Influence of Heavy Truck Operating Condition on Dynamic Load Coefficient
2019
The objective of this study was to evaluate influence of heavy truck operating condition on dynamic load coefficient. A three-dimensional nonlinear dynamic model of heavy with 15 DOF (degree of freedom) was established based on Zhou Changfeng model for simulation and analysis. The tire dynamic load and dynamic load coefficient (DLC) was chosen as objective function which uses Matlab/Simulink software to simulate the full vehicle dynamics model with nonlinear rubber suspension and calculate the objective function. The influence of the different operating conditions such as road surfaces, vehicle speeds, sprung mass on dynamic load coefficient was analyzed. The results show that the influence of the road surface roughness, vehicle speed and vehicle sprung mass on the DLC values of wheel at 3rd axle as well as road friendliness is very obvious. Especially, this study proposes that the speed limits for AD250 articulated dump truck are vmax ≤ 30 km/h for the road surface condition of the ISO level D, vmax ≤ 20 km/h for the road surface condition of the ISO level E.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
7
References
5
Citations
NaN
KQI