Erosion Process and Temporal Variations in the Soil Surface Roughness of Spoil Heaps under Multi-Day Rainfall Simulation

The extensive artificially accelerated erosion of spoil heaps on newly engineered landforms is a key ecological management point requiring better understanding. Soil surface roughness is a crucial factor influencing erosion processes; however, study on spoil heap erosion with a view of surface roughness is lacking. This study investigated the erosion processes and the spatiotemporal variation of surface roughness on spoil heaps, and then, analyzed how the roughness affected the hydrological and sediment yield characteristics. Sequences of four artificial rainstorms with constant rainfall intensity (90 mm/h) were applied to cone-shaped spoil heaps (ground radius 3.5 m, height 2.3 m) of a loess soil containing 30 mass percent rock fragments. The surface elevation was sampled by a laser scanner. For the surface roughness indicators, the root mean square height (rmsh) and the correlation length (cl) increased sharply during the first rainfall event, and in the last three rainfall events, rmsh increased slightly and cl showed a relative decrease. The initial rmsh/cl of the whole slope surface ranged from 0.063 to 0.135, and increased with the rainfall sequence, thus, indicating that the spoil heap surface became rougher. Increasing soil roughness in the rainfall sequence delayed the initial runoff time and increased the runoff yield. The average runoff coefficient of the spoil heaps was 0.658. The average erosion rate of each rainfall event can be simulated by a regression equation of the corresponding average runoff rate and median cl (R-square of 0.816). Soil slumping with an average volume of 0.014 m3 occurred in the first two rainfall events, thus, significantly changing the roughness and peak instant erosion rate. Together, the results revealed the effects of surface roughness on the erosion of spoil heaps and would provide a useful reference for soil loss prediction and control.