Development of an electroactive aerobic biocathode for microbial fuel cell applications
2020
Microbial biocathodes are gaining interest due to their low cost, environmental friendliness, and sustainable nature. In this study, a microbial consortium was enriched from activated sludge obtained from a common textile effluent treatment plant in the absence of organic carbon source to produce an electroactive biofilm. Chronoamperometry method of enrichment was carried out for over 70 days to select for electroactive bacteria that could be used as a cathode catalyst in microbial fuel cells (MFC). The resultant biofilm produced an average peak current of -0.7 mA during the enrichment and produced a maximum power density of 64.6 ± 3.5 mW m-2 compared to platinum (72.7 ± 1.2 mW m-2 ) in a Shewanella-based MFC. Microbial community analysis of the initial sludge sample and enriched samples, based on 16S rRNA gene sequencing, revealed the selection of chemolithotrophs with the most dominant phylum being Bacteriodetes, Proteobacteria, Firmicutes, Actinobacteria and Acidobacteria in the enriched samples. A variety of CO2 fixing and nitrate reducing bacteria were present in the resultant biofilm on the cathode. This study suggests that microbial consortia are capable of replacing expensive platinum as a cathode catalyst in MFCs. This article is protected by copyright. All rights reserved.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
29
References
6
Citations
NaN
KQI