Wire mesh fences for manipulation of turbulence energy spectrum
2021
Manipulation of turbulence within an atmospheric boundary layer flow by application of woven wire mesh fences is investigated. Turbulence properties behind fences of different porosities and mesh opening widths were determined from velocity measurements in a wind tunnel. It is found that with the application of a fence with a porosity of 0.46, the streamwise turbulence intensity can be reduced from the inflow level of 12.5%–8.8% and the integral length scale can be reduced from 380 to 270 mm. The results show that behind the mesh fences turbulence kinetic energy decays as a power law function of the downstream distance for all wire mesh fences tested in the wind tunnel. The decay rate of turbulence kinetic energy is faster, and a larger reduction in the integral length scale is achieved for fences with porosities between 0.46 and 0.64 compared to higher porosities of between 0.73 and 0.75. Porosity of the woven wire meshes is found to be the key parameter which influences their turbulence reduction performance. In the end, application of the wire mesh fences for reduction of wind loads on solar panels and heliostats is discussed. Evaluation of wind loads based on the reduction of turbulence intensity and integral length scale shows that up to 48% and 53% reduction in peak drag and lift forces on a heliostat, respectively, can be achieved with application of mesh fences.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
60
References
1
Citations
NaN
KQI