Multiwavelength Single-Longitudinal-Mode Brillouin–Erbium Fiber Laser Sensor for Temperature Measurements With Ultrahigh Resolution
2015
A multiwavelength single-longitudinal-mode (SLM) Brillouin-erbium fiber laser sensor with ultrahigh resolution is proposed and investigated experimentally. The one short common cavity with 50 m of single mode fiber (SMF) as the fiber under test and 100 m of SMF as the reference can effectively reduce the external perturbations and the cost. With the configuration that uses a fiber Fabry-Perot (FFP) filter, every Stokes wavelength maintains SLM status, which can lead to the higher temperature resolution. In the experiment, 3.104 MHz/ � C sensitivity of the third-order Stokes wavelength is dem- onstrated, which is three times that of the first-order Stokes wavelength. A less-than 0:2 � C temperature error is obtained for every Stokes wavelength. In contrast, with a beat frequency linewidth of a different order Stokes wavelength, approximately 10 � 6 � C ultrahigh resolution in the short term is acquired at the third-order Stokes wavelength. This proposal can provide a feasible temperature sensing scheme with high sensitivity, high precision, and low-frequency detection.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
28
References
20
Citations
NaN
KQI