Heat development at the microscale in ceramic components - thermography and complementary tools

In many ceramic components for electric applications, small defects in the microstructure may cause an anomalous current flow. Especially in components exhibiting nonlinear electro-thermal properties, such as varistors, PTC or NTC resistors, inhomogeneities lead to high concentrations of current and localized heat generation due to positive feedback effects. While the integral behavior of those components is often nearly not affected by these defects, the local load at these hot spot regions is considerably high and can even lead to the complete failure of the device. In this work micro-analytical tools are combined to identify the location and type of defects which may cause leakage currents, overheat or other reasons for inhomogeneous current distributions in functional ceramic components. Lock-in thermography is used to localize dominating current paths. This is even possible if the heat sources are in the micrometer range or less. Additionally, micro-sectioning techniques (e.g. Focus Ion Beam) are uti...