Insert model coil wound by Al/sub 2/O/sub 3/-Cu strengthened Nb/sub 3/Sn wire
1997
With the aim of fabricating large-bore, high-magnetic-field magnets with low coil weight and volume, an alumina-Cu reinforced Nb/sub 3/Sn wire of 1 km in length has been developed by improving the workability of the tube process. Two kind of insert model coils were made using the developed wire and the conventional Cu-matrix wire. The maximum quench current observed was 126 A in a backup field of 11 T, which corresponds to an electromagnetic force of 244 MPa. The coil strain for the reinforced coil was always smaller than that for the Cu-matrix coil.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
3
References
11
Citations
NaN
KQI