[Study of brain edema by an infusion edema Model--the method and characteristics of the model].

: In this report, we have described the way of making the infusion edema model, physiological changes of various parameters during this procedure, distribution of water content in white and gray matter and the light and electron microscopic findings of this edema model, for the further understanding of vasogenic edema of the brain. To make the infusion edema model, 25-G needle was stereotaxically inserted into the left frontal white matter of the cat brain. Through the polyethylene catheter with three way stop cock, this catheter was connected to the pressure transducer and slow infusion pump. By this way, we can monitor the pressure of infusing fluid into the white matter. Normal saline was infused with initial rate of 0.75 microliter/min for the first 2 hours. The inflow rate was increased to 1.5 microliter/min for the next one hour, and then changed to 3.0 microliters/min for maintenance inflow rate. The total amount of infused volume was 0.5 ml in this study. During making the infusion edema model, blood pressure and PaCO2 changed little. Intracranial pressure slightly increased from 5.8 to 15.1 mmHg. Pressure volume index (PVI) changed from 0.74 to 0.64, suggesting the changes of intracranial compliance. The water content measured by specific gravimetric technique showed nearly the same water contents and distribution of edema fluid in the white matter of the cat as in the cryogenic injury model. Pathological findings of this infusion edema model demonstrated that the infused liquid was accumulated in the extracellular space of white matter without damaging the tight junction, and endothelial cells.(ABSTRACT TRUNCATED AT 250 WORDS)