Thermal conductivity of oriented crystalline polymers

Thermal conductivities of six oriented semicrystalline polymers which range from 0.37 to 0.63 in crystallinity and 1 to 5 in draw ratio λ (up to about 15 for two polymers) have been measured between 100 and 340 K. It was found that for increasing λ the conductivity K∥ (along the draw direction n) increases rapidly while K⊥ (normal to n) decreases slightly; K∥ also increases with temperature, but K⊥ shows no simple pattern in temperature dependence. These general features can be reproduced reasonably well at low draw ratio (λ < 5) by the modified Maxwell model, and the discrepancy in details may be attributed to the fact that the model does not take into account the possible anisotropy of the amorphous phase of the oriented polymers. At high draw ratio the intercrystalline bridge effect becomes important, and one must resort to the Takayanagi model, but the lack of corroborating x-ray data has rendered a detailed comparison impossible.