Characteristics of Moisture Transfer and Surface Crack Development of a Single Lignite Particle Driven by Humidity Difference.

The research on moisture transfer characteristics and surface crack development of a single lignite particle (SLP) driven by humidity difference is helpful to achieve a better understanding of the fragmentation characteristics of lignite during the moisture transfer process. This is of great significance to the safe operation of a drying system. The characteristics of moisture transfer within SLP driven by humidity difference were studied in different stages. Six drying equations commonly used in the literature were selected to describe the moisture transfer behavior. The apparent diffusion coefficient (Deff) of moisture in each stage was calculated to compare the driving forces of moisture transfer in different stages. The surface crack rate (CR) was used to quantitatively analyze the fragmentation characteristics of SLP caused by moisture transfer. The results showed that the moisture transfer process of SLP driven by humidity difference can be divided into three stages, and stage I is the main moisture removal stage. The larger the particle size, the longer the stage I, while less moisture is removed in this stage. A logarithmic drying equation best simulates the moisture transfer process of SLP. The larger the particle size, the larger the Deff value in each stage. The driving force of moisture transfer in stage I is the largest, which is the opposite of a thermal drying process. CR for SLP has experienced a rapid increase - stable at the highest value - rapid decrease - stable during the moisture transfer process driven by the humidity difference.