Photobase generator enabled pitch division: a progress report
2011
Pitch division lithography (PDL) with a photobase generator (PBG) allows printing of grating images with twice
the pitch of a mask. The proof-of-concept has been published in the previous paper and demonstrated by
others. Forty five nm half-pitch (HP) patterns were produced using a 90nm HP mask, but the image had line
edge roughness (LER) that does not meet requirements. Efforts have been made to understand and improve the
LER in this process. Challenges were summarized toward low LER and good performing pitch division.
Simulations and analysis showed the necessity for an optical image that is uniform in the z direction in order for
pitch division to be successful. Two-stage PBGs were designed for enhancement of resist chemical contrast. New
pitch division resists with polymer-bound PAGs and PBGs, and various PBGs were tested. This paper focuses on
analysis of the LER problems and efforts to improve patterning performance in pitch division lithography.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
9
References
5
Citations
NaN
KQI