Конвективная теплоотдача однорядных пучков из труб с накатными алюминиевыми ребрами различной высоты при малых числах Рейнольдса

The experimental study of the heat flow intensity of a single-row horizontal air-cooled tubular bundle of heat exchanger with spiral aluminum rolling fins at low Reynolds numbers (Re < 2000) is performed. The geometrical dimensions of the bimetallic finned tubes of the bundle, the following: the outer diameter of the fins d = 56.0 mm; the diameter of the tube at the base d 0  = 26.8 mm; fin height h = 14.6 mm; pitch of fins s = 2.5 mm; the average fin thickness Δ = 0.5 mm; the coefficient of finned tubes φ = 19.3; heat transfer length l = 300 mm. The outer diameter of the load-bearing steel tube d н = 25 mm; wall thickness d = 2 mm. The research was carried out by the method of full thermal modeling at a specially designed experimental stand with electric heating of tubes and an exhaust shaft installed above the bundle. The air flow rate through the bundle was regulated by changing the height and cross-sectional area of the exhaust shaft. Calibration experiments were carried out and confirmed the reliability of the data obtained. Then the fins were sanded so to form new types of tubes, which were arranged in a single-row six-tube bundle with a constant relative cross-step σ 1 = S 1 / d = 1.14 = const, and the thermal studies were repeated. As a result, a generalized criterion equation for heat transfer of a finned horizontal single-row bundle at small Reynolds numbers for various heights of the tube finning h  = 0-14.6 mm was obtained. The effective height of the tube finning ( h = 8 mm) for a single-row horizontal bundle was determined by dimensional and metal-intensive criteria.