Analysis of the stress and deformation states in the vertical flat jack test

2020 
Performing a realistic assessment of unreinforced masonry structures involves designing and executing appropriate experimental tests on masonry components for determining the material model parameters to be used in structural analysis. Considering recent developments in which inverse analysis was used as calibration framework, a vertical flat-jack test is investigated in this paper. Two simplified models are described for the analysis of the stress state in the masonry due to the pressure transferred by the flat-jack. Furthermore, with the aim of designing the sensor setup for the test, a POD analysis on the deformation state of the structure is carried out, highlighting the basic deformation modes which govern the response. The results show that high stresses and local modes can occur in the proximity of the flat-jack, and thus local use of FRP reinforcement is recommended to avoid undesired brittle crack propagation which may prevent accurate calibration of mortar joint mechanical characteristics.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    0
    Citations
    NaN
    KQI
    []