Comparing the USDA/AMS Subsampling Mill to a Vertical Cutter Mixer Type Mill Used to Comminute Shelled Peanut Samples for Aflatoxin Analysis1

Abstract The US peanut industry can use up to three 21.8 kg samples per lot to determine if shelled peanut lots are acceptable or unacceptable due to aflatoxin content. If a lot is accepted by the first 21.8 kg sample (1AB≤8 ng/g) prepared with the USDA/AMS Subsampling mill (DM), then some peanut buyers request that the sheller prepare the second sample (2AB) and in some cases the 3AB sample (called special samples in the trade) with a vertical cutter mixer (VCM) type mill. These requests to specifically use the VCM instead of the DM to prepare official (1AB) and special (2AB or 3AB) samples is based in part on a perception that analytical results associated with a test portion taken from the 21.8 kg sample comminuted with a DM does not detect the full magnitude of aflatoxin in the 21.8 kg sample and that negative aflatoxin certificates (lot acceptance) are more likely to occur when samples are prepared with a DM than a VCM. Analysis of aflatoxin test results from two shellers along with Monte Carlo simul...