Analytical orientation criteria for drilling and completion-induced fracture initiation considering fluid infiltration from the wellbore

Abstract Analytically-developed criteria are presented for the orientation of fracture initiation in porous-permeable rocks considering fluid infiltration from non-perforated and perforated wellbores. For non-perforated wellbores, this is a fully-exact analytical solution representing the initiation of drilling-induced tensile fractures (DITFs). For perforated wells, a set of analytical approximations are derived for fracture initiation representing completion-induced hydraulic fractures (CIHFs). DITF orientation is used to constrain the in-situ stress tensor, especially in the case of transverse DITFs, which are rarer than longitudinal DITFs. Results indicate that transverse CIHF initiation only occurs over a wellbore pressure-at-breakdown window, while longitudinal CIHF initiation occurs at comparatively higher wellbore pressures. Transverse CIHF initiation however, occurs more frequently than transverse DITFs, because the presence of perforations aids transverse fracture initiation. Low Biot's poroelastic coefficient and high Poisson's ratio values also aid transverse fracture initiation. The region of the in-situ stress states where transverse initiation is promoted can be shown in dimensionless plots. Case studies are run on seven prolific shale plays (Barnett, Bakken, Fayetteville, Haynesville, Niobrara, Marcellus, and Vaca Muerta) using breakdown pressures from the literature. Transverse CIHF initiation is found to be a highly likely outcome, as opposed to results from past studies that neglected pore pressure effects. Based on the findings of this study, recommendations are made to practitioners to enhance their chances on achieving transverse CIHF initiation in the field. These involve slow injection rates, oriented perforation strategy and strong bonding between the casing, cement and the surrounding rock to prevent fracturing fluid leakages.