Low-Voltage High-Speed Ring Oscillator with a-InGaZnO TFTs

2020 
This paper presents a high-speed ring oscillator (RO) with amorphous Indium-Gallium-Zinc-Oxide Thin-film transistors (a-IGZO TFTs). The proposed RO reduces the delay of a single stage inverter using intermediate signals generated within the RO, hence, improving the speed. To validate the proposed idea, two conventional ROs (with diode-load load inverter and bootstrapped pseudo-CMOS inverter) and the proposed RO were fabricated at a temperature ≤ 180°C. Measured results of the proposed RO have shown a frequency and power-delay-product (PDP) of 173.2 kHz and 0.7 nJ at a supply voltage of 6V. Further, it shows approximately 155% (44%) increase in frequency and 14% (24.5%) decrease in PDP compared to diode-load inverter (bootstrapped pseudo-CMOS inverter) based ROs. Therefore, the proposed RO finds applications in low-voltage and high speed designs for timing signal generation.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    27
    References
    5
    Citations
    NaN
    KQI
    []