PROSTHETICS/ORTHOTICS/DEVICES A 3-Dimensional Finite Element Model of the Human Foot and Ankle for Insole Design

Cheung JT-M, Zhang M. A 3-dimensional finite element model of the human foot and ankle for insole design. Arch Phys Med Rehabil 2005;86:353-8. Objective: To investigate the effect of material stiffness of flat and custom-molded insoles on plantar pressures and stress distribution in the bony and ligamentous structures during balanced standing. Design: A 3-dimensional (3-D) finite element model of the human ankle-foot complex and a custom-molded insole were developed from 3-D reconstruction of magnetic resonance im- ages and surface digitization. The distal tibia and fibula, to- gether with 26 foot bones and 72 major ligaments and the plantar fascia, were embedded in a volume of soft tissues. Setting: Computational laboratory in a rehabilitation engi- neering center. Participant: A healthy man in his mid twenties (weight, 70kg). Interventions: Not applicable. Main Outcome Measures: Foot-support interfacial pres- sure, von Mises stress in bony structures, and strain of the plantar fascia were predicted using the finite element model. Results: A custom-molded, soft (Young modulus, E0.3MPa) insole reduced the peak plantar pressure by 40.7% and 31.6% at the metatarsal and heel region, respectively, compared with those under a flat, rigid (E1000MPa) insole. Meanwhile, a 59.7% increase in the contact area of the plantar foot was predicted with a corresponding peak plantar pressure increase of 22.2% in the midfoot. Conclusions: The finite element analysis implies that the custom-molded shape is more important in reducing peak plan- tar pressure than the stiffness of the insole material.