The Effect of Blood Viscosity on Shear-Induced Hemolysis using a Magnetically Levitated Shearing Device

Introduction: Blood contacting medical devices, including rotary blood pumps, can cause shear-induced blood damage that may lead to adverse effects in patients. Due in part to an inadequate understanding of how cell-scale fluid mechanics impact red blood cell membrane deformation and damage, there is currently not a uniformly accepted engineering model for predicting blood damage caused by complex flow fields within ventricular assist devices (VADs). Methods: We empirically investigated hemolysis in an axial Couette flow device typical of a rotary VAD to expand our current understanding of shear-induced blood damage in two ways. First, we used a magnetically levitated device to accurately control the shear rate and exposure time experienced by blood and to minimize the effects of other uncharacterized stresses. Second, we explored the effects of both hematocrit and plasma viscosity on shear-induced hemolysis to characterize blood damage based on the viscosity-independent shear rate, rather than on shear stress. Results: Over a shear rate range of 20,000-80,000 1/s, the Index of Hemolysis was found to be largely independent of hematocrit, bulk viscosity, or the suspension media viscosity. Conclusion: It is recommended that future investigations of shear-induced blood damage report findings with respect to the viscosity-neutral term of shear rate, in addition to the bulk whole blood viscosity measured at an appropriate shear rate relevant to the flow conditions of the device.